Form |
Stereo Integrated Amplifier |
Practical use maximum output |
90W+90W (4 ohm, EIAJ) |
Output power (Both channel drive, 20Hz - 20kHz) |
50W+50W (6 ohm, 0.03%) 40W+40W (8 ohm, 0.01%) |
Input sensitivity/impedance |
Phono man month: 2.5mV / 50kohm compact disk, Tuner, Line, DAT/Tape1, Tape2:150mV/40kohm |
Phono maximum permissible input |
man month: 150mV (1kHz, 0.02%) |
An Output voltage/impedance |
DAT/Tape1, Tape2, Line, Rec, Adaptor Out:150mV /, 2.2kohm |
Frequency characteristic |
Phono man month: 20Hz-20kHz±0.3dB compact disk, Tuner, Line, DAT/Tape1, and Tape2:5Hz-100kHz+0 -3 dB |
SN ratio (IHF, A network) Short circuit |
Phono MM:83dB(2.5mV compact disk, Tuner, Line, DAT/Tape1, Tape2:108dB |
Speaker load impedance |
A, B:4ohms - 16ohm A+B: 8ohm-32ohm |
Tone control (Volume -30dB) |
Bass: ±8dB (100Hz) Treble: ±8dB (10kHz) |
Loudness contour (Volume -30dB) |
100Hz:5dB 10kHz:3dB |
Supply voltage |
AC100V, 50Hz/60Hz |
AC outlet |
Power-switch interlock: Two lines (200W) Power-switch un-interlocking.: One line (100W) |
Power consumption (Electrical Appliance and Material Control Law) |
130W |
Dimensions |
Width 420x height 128x depth of 352mm |
Weight |
7.8kg |
Adjunct |
Remote control CU-A004
|