Air gage Tosok, máy đo bằng khí nén

- Tên sản phẩm: Air gage Tosok, máy đo bằng khí nén - Model: Air gage Tosok, - Tiêu chuẩn: JIS - Xuất xứ: Japan - Đơn giá: - Bảo hành: Tháng - Model khác: Air gage Tosok,     MÔ TẢ SẢN PHẨM

Air gage

	Column Type Air Gage CAG-2000 SERIES		Outside Head For Air Gage
	Flow Type Air Gage/ FT 5000 Series		Master For Air Gage
	Dial Type Air Gage/ MD-14L Series		Fine Ceramic Gage Head & Master
	Digital Air Micrometer DAG-2000 Series		Gage Head For Air Gage
	Digital Air Micrometer DAG-2200 Series		AE2000
	Inside Head For Air Gage		A/E Transducer Box

 

 

---

Column Type Air Gage CAG-2000 SERIES

EASY-TO-READ BAR GRAPH DISPLAY 

• The 3 color bar display makes measurement results easy to see.
• The 8-digit multi-function displays the measurement values and item name,etc.
• Zero adjustment and senst
• The body width is 50 mm,making it suited to display using multiple units.
• The serial communication function that is standard equipment enables data output to the PC and printer.Data savin,data processing and input to spreadsheet software (Exel) is possible.
• A air micrometer 1 channel or 2 channels is prepared.

NUMBER OF CANNELES 
There is a 1-Channel Type and 2-Channel Type 

1 Channel	2 Channel

EASY-TO READ BAR GRAPH DISPLAY 
The 101 dot,3-color bar garph display judgment indicates green for OK,red for NG

OK	NG

RANGE DISPLAY 
The dimension between the bar top and bottom edge is indicated by a 2-digital display

OPERATION PANEL 
JUDGMENT LAMPS 
These display the judgment result. judgment indicates.green for OK ,red for NG 
NUMERIC DISPLAY 
The 8-digit numeric display enables you to read the measurement results sirectly 
PANEL BUTTONS 
Master coordination is performed automatically when you press the swictches.You can switch the display between the measurement results of 2 locations,or display the arithmetic calculation results.

 

 

---

Flow Type Air Gage/ FT 5000 Series

"The TOSOK air micrometers are precision comparators which ingeniously apply the principles of aerodynamics. They are widely used in fields which require machining of precision parts as they have proved most effective in quality control and efficiency improvement. 
The FT-5000 series permits any number of air micrometers to be used stacked one upon another easily. It should be veryhelpful in quality control at your company. " 

• Low cost and good appearance
• The enlarging and indicating mechanisms have no wearable parts, enabling high precision to be maintained long.
• The float response is quick and stable.
• The high pressure air blows off dust and oil from the workpiece, assuring accurate measurement.
• Because of non-contact measurement, there is no fear of the workpiece being damaged or bent. The air micrometer is especially effective in measuring inside diameters.
• The air micrometer is free from hysteresis loss.

 

 

---

Dial Type Air Gage/ MD-14L Series

"The MD series dial pneumatic micrometers are precision comparators utilizing the flow of high pressure air. Back pressure which is amplified in proportion to a small clearance is indicated on the dial gauge. Unique adjustment functions allow for accurate magnification adjustment over a wide range. High pressure air blows off dust, oil, etc. to ensure accurate measurement and quick response." 

• The pneumatic micrometer offers all the advantages of non-contact measurement, high magnification, remote measurement, high efficiency, etc.
• The high pressure air type allows for a wide clearance between the measuring probe and object, hence offers a wide measuring range and prolongs the probe life.
• The precision regulator and amplifier relay assures accurate measurement,stable indication, and very quick response.
• Magnification can be adjusted over a wide range, and any desired measuring range can be obtained simply by changing the scale board.
• Several models of different magnifications, from low to high, are available.
• Not only the simple type but also the duplex type is very compact and easy to use.
• The dual indicator has two pointers (black and red), facilitating the correlation of dimensions of two parts to be seen easily.
• As the probe nozzle, even a nonstandard one can be used.

 

 

---

Digital Air Micrometer DAG-2000 Series

• The DGK series is unaffected by a fluctuation of the supply air pressure, allowing high accuracy measurement.
• It is compact in size and light in weight, hence can be used even in a confined space.
• Digital display allows anyone to read the indication at a glance.
• Model DGK-3200 permits a threshold to be numerically set accurately and easily.
• BCD output and contact output are convenient when applying the digital air micrometer in an automatic measuring system.
• Printer output can be connected to DP-1DX.
• INSIDE MEASURING HEAD PG-8000 
  DEG SERIES INSIDE HEAD

 

 

---

Digital Air Micrometer DAG-2200 Series

EASY TO APPLY TO AN AUTOMATIC MACHINE 

• Industry's first pneumatic micrometer with a 2-ch bar display.
• Taper,2-row,parallerism and pitch measurement for better operationability.
• Colored bar display that shows OK/NG.
• Signal-button swiching of display positions of measurement and calculation results.

 

 

 

---

Inside Head For Air Gage

 

PA Type for through hole measurement PB Type for blind hole measurement  PC Type for deeper point mesurement of blind hole  PKA Type indirect type gage head for non-contact meaurement using carbide point. It is applied to measurement of surfaces with a finish of 6 S or more and width of 4 mm PKB Type indirect type gage head for non-contact meaurement using carbide point. It is applied to measurement of surfaces with a finish of 6 S or more and width of 4 mm

 

---

Outside Head For Air Gage

 

PO Type with tungsten carbide chip type POT Type without TC chip type POK Type with tungsten carbide chip type  POR Type ring type

 

---

Master For Air Gage

 

Master Ring Gage Master Plug Gage

 

---

Fine Ceramic Gage Head & Master

Gage head and master made of new materials"FINE CERAMICS"features light weight, durability,strong resistance to corrosion,wear,oil and water unlike those made of steel.Titanium-Coated gage head and master are also available.

 

---

Gage Head For Air Gage

At Tosok, measurement tools could be designed and made for your specification.

 

---

AE2000

The AE2000 is a unit which converts the minute dimension changes detected with an air nozzle into electrical signals by means of a semiconductor differential pressure detector. MINUTE AIR NOZZLE MOVEMENT CONVERTED TO ELECTRONIC SIGNALS

 

---

A/E Transducer Box

"By combining the AE2000 with automatic measurement units such as the PEG8800 and PEG9000,the AE2000 can be included in a measurement device for precision parts."

 

Xin lên hệ với chúng tôi để nhận được sự tư vấn và hổ trợ:

Công Ty Cổ Phần Máy Công Nghiệp Toàn Cầu

DC: 979 Trần Xuân Soạn, Phường Tân Hưng, Q7, TP.HCM

ĐT: 08 39373374

DĐ: 0938 82 59 13

Hotline: 0904 259271

Website: http://maycongnghiep.net.vn

Website: http://quocthai.vn