Đang tải dữ liệu ...
  • Điện máy
  • Thời trang, Phụ kiện
  • Plaza Thời trang
  • Nội, Ngoại thất
  • Mẹ & Bé
  • Gia Dụng
  • Điện máy
  • Dịch vụ, Giải trí
  • Đi chợ Online
  • Ô tô, Xe máy
  • Nhà đất
  • Tổng hợp
  • Điện thoại
  • Tất cả
Đăng tin mới
Toàn Quốc
  • Hỗ trợ

    Dành cho khách hàng: Để mua sản phẩm bạn vui lòng liên hệ theo số điện thoại trong tin đăng của các shop.

    Dành cho chủ shop:

    Hỗ trợ trực tuyến:

    Đầu báo khói beam hochiki spc 24n,beam sra 24,đầu báo khói beam SYSTEM SENSOR 1224,cung cấp beam báo cháy các loại

    ID tin: 992140 Gửi lúc: 06:10, 20/06/2014 - Hồ Chí Minh Đã xem: 884

    Liên hệ mua hàng tại shop

    ANTOANNHUY
    • 0982424164
    • Xem bản đồ
    Đánh giá Shop

    Chưa có đánh giá

    Trung bình: 0

    • 1.0
    • 2.0
    • 3.0
    • 4.0
    • 5.0
     

    Bạn chưa đánh giá

    Hình phóng to

    Beam hochiki SPC-24
    Giá per Unit (Đơn vị): Gọi hàng

    Liên hệ với chúng tôi về sản phẩm này

    E-mail

    Click để xem ảnh to

    Đầu báo khói Beam SPC-24

    Model SPC-24

    Giá Call

    Tài liệu Tải về

    APPLICATION
    The Hochiki America SPC-24 Projected Beam Smoke Detector consists of an emitter and receiver. The projected beam smoke detector should be placed so that smoke generated by a fire will likely rise into the path of the beam. The receiver is constantly monitoring and measuring the intensity of the beam transmitted
    by the emitter. Should the smoke from a fire cause a decrease in the signal strength of a magnitude that exceeds the programmed obscuration setting, an alarm signal is generated.
    The SPC-24 Projected Beam Smoke Detector can provide vital fire detection in applications where other types of detectors may not be able to respond quickly, or at all, to a fire condition. Examples of some applications where projected beam smoke detectors have been successfully used include: atriums gymnasiums theatres
    museums factories tunnels churches stables warehouses
    anecoic chambers high air velocity areas The Hochiki America SPC-24 Projected Beam Smoke Detector may also be used in conjunction with more traditional spot type smoke detection devices to provide an even more comprehensive detection system

    OPERATION
    The near infrared pulsed beam generated by the emitter is sensed by the photodiode of the receiver, where it is converted into an electrical signal. This signal is then amplified and applied, via an analog to digital converter, to a microprocessor. The normal state signal (the initial beam data) once stored in the microprocessor
    is used as reference for comparison with subsequent beam signals.
    When there is a difference between actual beam strength and stored reference data that exceeds the programmed alarm obscuration reference level, a fire signal is produced. A trouble signal is generated if the beam is more that 90% obstructed (as opposed to partially obscured by smoke).
    The microprocessor also provides compensation for a change in received signal value, with time, caused by contamination
    of the optics. Since such a change with time appears as a slow change in the beam signal, the microprocessor
    compensates in such a manner that the signal moves closer to the reference data at a rate approximately +1% per
    hour. When this compensating capability reaches a limit, the SPC-24 automatically generates a trouble signal.
    A calibrated test filter is available upon request to test and verify the sensitivity setting of the SPC-24 projected beam
    smoke detectors.

    STANDARD FEATURES
    • Microprocessor based for reliability
    • Simple setup & alignment with signal strength LED's
    • Provides 60 feet on center linear protection at a
    range of 32.8 feet to 328 feet
    • Automatic compensation for signal drift or dirty lens
    • Three field adjustable sensitivity settings
    • Form A alarm and Form B trouble contacts
    • Calibrated filters available to verify sensitivity
    • Color-coded emitter and receiver labels for easy
    recognition

    SPECIFICATIONS
    Rated Voltage 24VDC
    Working Voltage 19VDC - 33VDC
    Supervisory Current Emitter 50 A @ 24VDC
    Receiver 200 A @24VDC
    Alarm Current 20mA @ 24DC
    Trouble Current 20mA @ 24VDC
    Installation Temperature
    Range 32° F - 100° F
    Sensitivity Test Feature Hochiki test filters
    Allowable missalignment Emitter +/- 0.5°
    angle (MAX) Reciever +/-1.0°
    Dimensions 5.5" Tall
    3.2" Wide
    4.0" Deep
    Mounting Wall mount or
    Maximum Humidity 95% R.H. non-condensing
    Like ÉnBạc để tiếp cận nhiều sản phẩm tuyệt đẹp mỗi ngày
    CÔNG TY CHUYÊN CUNG CẤP THIẾT BỊ PCCC AN TOÀN NHƯ Ý
    ANTOANNHUY
    • 0982424164
    • Xem bản đồ
    Đánh giá Shop

    Chưa có đánh giá

    Trung bình: 0

    • 1.0
    • 2.0
    • 3.0
    • 4.0
    • 5.0
     

    Bạn chưa đánh giá

    Tin đăng cùng mục "Khác"
     Giá bán: 2.500.000 VNĐ
    Vào shop ANTOANNHUY để xem thêm sản phẩm
    Các tin bạn đã xem